Playcore Swing-N-Slide Pb 8206 Instrucciones De Ensamblaje página 25

Assembly Instructions
Fig. 15
Washer
2-1/2'' screws
Loc-Nut
2-1/2'' screw
-Frame ssembly cont.
1. Align EZ-Frame Bracket with carriage bolts on Swing Beam in the location shown in (Fig. 15).
2. Attach A-Frame beam to Swing Beam using (1) washers and (1) Loc-Nuts and (2) screws as shown in (Fig. 15).
3. Repeat on other bracket. Tighten both Loc-Nuts.
25