Playcore Swing-N-Slide Pb 8206 Instrucciones De Ensamblaje página 41

Fig. 31
(3) [PF 3909] 2'' x 4'' x 23-3/8''
Monkeybar ssembly:
1. Attach (3) Monkey Bar Steps as shown in (Fig. 31).
2. Attach (4) Monkey Bar Rungs as shown in (Fig. 31a).
3. Attach (2) 'L' Brackets as shown in (Fig. 31b).
Pre-Drill Note: To prevent wood from splitting, pre-drill all holes for the Monkey Bar Rungs and 'L' Brackets. Use a
1/8'' drill bit & drill to a maximum depth of the length of the Lag Screw used.
(3)
1-1/4''
screws
per bracket
1-1/4'' Wood Screw
Fig. 31a
10-1/2''
11''
11''
11''
Fig. 31b
(3)
1-1/4'' Lag
screws
per bracket
41
Assembly Instructions
(2)
2'' Lag
screws
per bracket
(4)
23-1/4'' Monkey Bar
Rungs
(2)
[PF 3404]
2'' x 4'' x 47-1/2''
Pre-Drill
(2)
'L' Brackets
2'' Lag screw