Teka HK-800 Manual Del Usuario página 16

17 Select a cooking function and temperature.
18 The oven will remain off, with the
symbol lit and the
slowly. The clock will show the current time
and the inside light will remain off. The
oven is now programmed.
19 When it is time to start cooking, the oven
will switch on and will operate for the
programmed cooking time. The clock
display will show the remaining cooking
time.
10 Once the set time is reached, the oven will
turn off, an alarm will sound and the
and symbols will flash.
11 Press on any sensor on the control panel
to stop the alarm.
If you wish to change the cooking stop time
while cooking is in progress, press on the
clock sensor until the
You can then change the cooking stop time by
pressing on the
beeps you hear after that will confirm the new
time has been set.
symbol flashing
symbol flashes.
or sensors. The two
Child Safety Function
This function locks the oven, preventing small
children from playing with it. To turn on the
function, press on the
hear a long beep and see several flashing
dots between the digits of the temperature
display . The oven is now locked.
To turn off the child lock, keep the
symbol pressed until a long beep sounds.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 12:00
will flash on the clock display. Reset the clock
and programme again.
symbol until you
16)
17