Jensen DMR2116 Manual Del Propietário página 25

Traffic Announcement Settings
AlternativeFrequenciesOn/Off
Note: The following selection is available only when "AREA EUR" is selected.
The Alternative Frequencies (AF) setting allows a radio to re-tune to a different
frequency that provides the same station when the first signal becomes too weak.
When "AF" appears on the display panel, RDS information is received. When "AF"
flashes, RDS information is not yet received.
1. Press and hold the volume knob repeatedly until "AREA USA" appears on the
display panel.
2. Rotate the volume knob to select "AREA EUR".
3. Immediately press the volume knob. "AF ON" appears in the display panel.
4. Rotate the volume knob to select "AF ON" or "AF OFF".
5. Leave the unit idle for the setting to take effect.
TrafficAnnouncementsSeek/Alarm
This setting selects the TA Seek or TA Alarm function:
• TA Seek - When the TA function is activated, the radio searches for a station with
traffic announcements
• TA Alarm - No automatic station search. The radio sounds a beep tone if no
traffic information is received. "NO TP/TA" appears on the display panel.
1. Press and hold the volume knob repeatedly until "AREA USA" appears on the
display panel.
2. Immediately press the volume knob. "TA SEEK" appears in the display panel.
3. Rotate the volume knob to select "TA SEEK" or "TA ALARM".
4. Leave the unit idle for the setting to take effect.
DMR2116
25