BASICOPERATION
TurningtheUnitOnorOff
Press the (Power On/Off ) button to turn the unit on. The message "JENSEN"
appears on the display panel, indicating the unit is ready for use.
When the unit is on, press and hold the (Power On/Off ) button to turn the unit
off.
SelectinganAudioSource
Press the SRC button on the faceplate to select radio, auxiliary device, USB or SD
play.
Note: USB or SD mode can only be selected when an USB flash memory or SD card is
inserted into the USB port or SD port, respectively.
Volume
Rotate the volume knob on the faceplate to adjust the volume level. The larger the
number, the higher the volume level.
MuteControl
Press theMUTE button briefly to mute the sound instantly. "MUTE" appears on the
display panel. Press it again to restore the sound. Adjusting the volume knob also
cancels the mute function.
SystemSettings
When using the mobile audio system for the first time, it is recommended that you
customize the system settings to suit your preferences.
Sound Adjustment Mode
The sound adjustment mode allows you to easily adjust your mobile audio system
to meet the acoustical characteristics of your vehicle.
Toadjustthebass:
1.
Press the volume knob repeatedly until "BAS" appears on the display panel.
2. Rotate the volume knob to adjust. When an equalizer preset is ON, bass
control is not available.
Toadjustthetreble:
1.
Press the volume knob repeatedly until "TRE" appears on the display panel.
2. Rotate the volume knob to adjust. When an equalizer preset is ON, treble
control is not available.
20