Important Instructions; For Your Safety; Instructions For Assembly - Kettler 07499-300 Instrucciones De Montaje

Important Instructions

GB
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

! RISK!
While assembly of the product keep off children's re-
ach (Choking hazard - contains small parts).
! RISK!
Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for da-
mage or injury caused by improper use of the equipment.
! RISK!
Instruct persons using the equipment (in particular chil-
dren) on possible sources of danger during exercising. Only
for appliances with weights or dumbbells. This especially ap-
plies to the area of movement of weights and dumbbells.
! RISK!
Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the
safety of the user.
! WARNING!
The training device should be used only for its
intended purpose, i.e. for physical exercise by adult people.
! WARNING!
Before beginning your program of training, stu-
dy the instructions for training carefully.
! WARNING!
Any interference with parts of the product that
are not described within the manual may cause damage, or
endanger the person using this machine. Extensive repairs
must only be carried out by KETTLER service staff or qualified
personnel trained by KETTLER.
The training device has been designed in accordance with the
■
latest standards of safety. Any features which may have been

Instructions for Assembly

! RISK!
Ensure that your working area is free of possible sour-
ces of danger, for example don't leave any tools lying
around. Always dispose packaging material in such a way
that it may not cause any danger. There is always a risk of suf-
focation if children play with plastic bags!
! WARNIN
G! Please note that there is always a danger of in-
jury when working with tools or doing manual work. Therefo-
re please be careful when assembling this machine.
Ensure that you have received all the parts required (see
■
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings careful-
■
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
■
6
a possible cause of injury have been avoided or made as safe
as possible.
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components tho-
■
roughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts.
Before use, always check all screws and plug-in connections
■
as well as respective safety devices fit correctly.
Always wear suitable shoes when using.
■
Our products are subject to a constant innovative quality as-
■
surance. We reserve the right to perform technical modificati-
ons.
In choosing the location of the apparatus, ensure a sufficient
■
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways
(paths, doorways, corridors). The safety distance surrounding
must extend at least 1 meter further than the practice area.
Always observe the general safety rules and precautions for
■
working with electrical equipment.
Please observe the maximum admissible load of 500 kg.
■
This training device has to be set up on a horizontal surface
■
under all circumstances. Place rubber or straw mats under it
to deaden any noise or impacts. Only for appliances with
weights. Avoid powerful oscillations of the dumbbells!
person. If in doubt call upon the help of a second person, if
possible technically talented.
The fastening material required for each assembly step is
■
shown in the diagram inset. Use the fastening material exact-
ly as instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check
that all screw connections have been tightened firmly. Attenti-
on: once locknuts have been unscrewed they no longer functi-
on correctly (the locking device is destroyed), and must be re-
placed.
For technical reasons, we reserve the right to carry out preli-
■
minary assembly work (e.g. addition of tubing plugs).