Aufstellung
• Installation •
A
• Open the door.
• Remove the transport safety device (A) and
keep for later use.
• Mount the supporting screws (A).
• Screw down the supporting screws until the
rear castors are balanced.
A
3
Waste cart
• Put the plastic bag into the waste cart as
described under "replace bag".
(See page 22)
• Push the cart into the machine, with the
open side facing you, until it touches the
buffer.
• Close the door.
- 13 -
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920