Pentax HP Manual Del Usuario página 46

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 106
3. SAFETY
Read this chapter and all its paragraphs very carefully as it contains important
informations about the hazards both the user and the maintenance personnel can
refer to in case the pump is being used wrongly.
ATTENTION!
In general the submersible pumps have been designed and built for transporta-
tion of water in civil, industrial, agricultural sectors.
Applications and limitations for pump usage are indicated in chapter 2 "TECH-
NICAL SPECIFICATIONS". Any other different use is not allowed.
THE MANUFACTURER DOES NOT ACCEPT RESPONSIBILITY FOR ANY
DAMAGE TO PERSONS OR OBJECTS CAUSED BY INCORRECT USE OF
PUMPS.
GENERAL PRECAUTIONS
ATTENTION!
The user and the maintenance personnel are obliged to carefully follow
the regulations referred to laws and accident prevention normes in force
in the country where the pump is installed.
Furthermore they are obliged to:
- neither move nor defuse mechanical and electrical protections or other;
- pay attention to the warnings reported in the labels stuck on the pump
and on the manual.
- always use individual protection measures like accident prevention shoes and gloves.
Safety warnings will be evidenced as follows:
DANGER: warns of an imminent danger harmful for persons
(serious lesions, even death).
ATTENTION: warns of situations and/or attitudes less harmful for persons
(more or less serious lesions, and/or death)
CAUTION: warns of risky situations and/or attitudes less harmful for persons and/or things.
ELECTRIC SHOCK HAZARD
it's a particular safety warning reported in the rating plate
of the pump panel only where the hazard of electric shock
is very high.
HAZARDS AND PROTECTIONS
In detail a list of hazards the user or the maintenance personnel can
run during assembly or maintenance, and a list of the protection
measures the manufacturer has taken up to reduce these hazards at
minimum. (fig.16).
ATTENTION!
The purchaser has to verify the usage conformity of the pump and the
compliance with safety measures according to the place of installation.
ATTENTION!
Connection with piping and its respective system must be always carried out
by qualified personnel according with the laws of the country where the pump is installed.
• COLLISION HAZARD
Due to the pump parts as high as the user.
• ENTANGLING HAZARD
Always restore safety protection covering rotating parts.
11
Stainer
Fig.16
Coupling
guard
NO!

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

HvHpmHvmHpr

Tabla de contenido