Sanus BLL2 Manual De Instrucciones página 11

MANAGE CABLES
K
R
1. Pull down and hold both release cords
CAUTION:
To prevent breaking the locking latch: always pull and hold release cords
2. Temporarily rest the TV on the kick stands
CAUTION:
TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step.
3. Lift the kick stands up while holding the TV.
K
4. Gently rest the TV back until the brackets click and lock the TV in place.
ADJUSTMENTS
SIDE-TO-SIDE SHIFT
HEAVY
assistance with this step.
REMOVING THE TV
1. Disconnect all cables from the TV.
2. To unlock the TV from the wall plate:
cords while gently pulling the bottom of the TV away from the wall.
R
CAUTION:
Avoid potential personal injury or property damage!
To prevent breaking the locking latch: always pull and hold the release
cords down while pulling the TV away from the wall.
R
3. Lift the TV up and off of wall plate
NOTE: To rehang the TV, follow the procedures in STEP 3 on PAGE 10.
1
04
06
04
R
while gently pulling the bottom of the TV away from the wall until the kick stands fall into place.
R
while assembling the cables on the TV.
K
! You may need
Pull down and hold both release
.
06
2 3
K
down while pulling the TV away from the wall.
R
06
HEAVY
! You may need
assistance with this step.
1 2
R
4
04
K
3
01
06
06
11