WEG WECC300 V1.2X Referencia Rápida De Los Parámetros, Alarmas Y Fallas página 15

Fault / Alarm
A712
SoftPLC Protected Against
Copy
F750/A750 to
F799/A799
User's Faults/Alarms for
SoftPLC
QUICK REFERENCE OF PARAMETERS, ALARMS AND FAULTS
Description
It occurs when there is an attempt
to copy the SoftPLC application
protected against copies.
Fault/Alarm range intended for the
user's application developed in the
SoftPLC function.
Possible Causes
Attempt to copy SoftPLC application protected against
copies ("never permit copies").
Attempt to copy SoftPLC from a copy protected against
copies ("no permission to copy from a copy").
Defined by the user's application developed in the SoftPLC
function.
WECC300 | 15