Setup; Release Refrigerant Scale; Lock Refrigerant Scale - Sun Blizzard Qtech III Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 455

SETUP

The machine is supplied fully assembled and tested.
Remove the protections under the refrigerant scales as follows:

Release refrigerant scale:

-
In order to remove the protections under the refrigerant scale the screw (ref.1, Fig.3)
has to be unscrewed until it full stops
-
Connect the machine to the electrical supply and switch it on
-
Check if the value of refrigerant scale is correct.

Lock refrigerant scale:

NOTE: in the event that the equipment has to be transported, the refrigerant bottle scale
should be locked in place as follows:
1. Switch the machine on.
2. Tighten the screw (ref.1, Fig.3) until the display signals ZERO availability.
NOTE: Check that the oil containers are properly placed in their housing
INSTRUCTIONS MANUAL
-16-
1
FIG. 3

Publicidad

Tabla de contenido
loading

Productos relacionados para Sun Blizzard Qtech III

Tabla de contenido