Sun Blizzard Qtech III Manual De Instrucciones página 93

7) then the following screen is displayed:
8) Type the filter code and press OK to delete the alarm. If the filter code is not available,
call the Service Center:
9) Remove the dryer filter, use the special wrench (ref Fig.18)
FIG. 18
10) press OK to continue:
INSTRUCTIONS MANUAL
R134a
Recovering gas from filter...
CHANGE DRYER FILTER
R134a
Reset service alarm
Enter filter code
CHANGE DRYER FILTER
R134a
Unscrew
Remove the drier filter
Use the special wrench
and press OK
CHANGE DRYER FILTER
-93-
MAINTENANCE
MAINTENANCE
MAINTENANCE