Bottle Pressure - Sun Blizzard Qtech III Manual De Instrucciones

BOTTLE PRESSURE

From CALIBRATION, select BOTTLE PRESSURE, the following screen is displayed:
Press OK, the following warning message is displayed:
ATTENTION: Automatic Bottle Pressure calibration can be done only if A/C Pressure is
calibrated and with a minimum of 1 kg of gas inside the bottle.
Press OK to continue:
Close the red bottle valve (ref 7, Fig.17), then press OK:
Make sure that HP and LP couplings are disconnected from A/C system or else, then press OK
to continue:
INSTRUCTIONS MANUAL
R134a
PB
AUTOMATIC CALIBRATION
Press OK
R134a
Automatic BP calibration can be done
only after a PA/C calibration and with a
minimum of 1kg of gas inside the bottle.
Press OK
R134a
PB
AUTOMATIC CALIBRATION
Close the red bottle valve
Press OK
R134a
Make sure that HP and LP
couplings are disconnected from
A/C system or else
Press OK to continue
-81-
BOTTLE PRESSURE
BOTTLE PRESSURE
BOTTLE PRESSURE
BOTTLE PRESSURE