Sun Blizzard Qtech III Manual De Instrucciones página 58

The mixture (N +H ) will be injected into the A/C system, the test will start as soon as the
2 2
pressure is stable:
Check for leaks on the connections of the A/C system using a leak detector, then press OK to
continue. The machine will discharge the mixture:
then the machine will sound and alarm and the following screen will be displayed:
Disconnect coupling, then press OK the following screen will be displayed:
INSTRUCTIONS MANUAL
R134a
N2+H2 INJECTION
N2+H2 pressure
x.x bar(rel)
N2+H2 TEST
R134a
Check for leaks on the
connections of the A/C system
using a leak detector
and press OK
N2+H2 TEST
R134a
N2+H2 discharge...
N2+H2 TEST
R134a
Disconnect N2+H2 coupling
and press OK
N2+H2 TEST
R134a
Close and disconnect HP and LP coupling from A/C
system and press OK
N2+H2 TEST
-58-
DEVICES
DEVICES
DEVICES
DEVICES
DEVICES