ABB W2256 BL Manual Del Usuario página 7

M A N U A L
Mini OS manages ID cards
Create the first admin card
If this Mini OS has not enrolled any card, unlock LED will flash green, orange and red in sequence when it
is powered on. To create the first admin card, you have 60s after powering on the OS to swipe 1 time the
card of your choice and unlock LED will light green if successfully. Notice that an admin card is not a user
card anymore and cannot serve to unlock the OS.
In the standby status, following functionalities can be implemented:
Function Command
Enroll user Swipe admin card 2x
Swipe user card 1x
Delete user Swipe admin card 3x
Swipe user card 1x
Open a door Swipe the enrolled ID card 1x
Reset Mini OS to factory default
1. Disconnect the power supply
2. Set rotary switches of address to "0" and all the dip-switches to "OFF"
3. Connect the power supply
4. Long press the first button for 3 s
5. Unlock LED will flash green, orange and red in sequence if successfully
Registering an account on the MyBuildings portal
Download App
Unlock LED
Flash orange 2 times and bip 1 time
Light green
Flash orange 3 times and bip 2 times
Light green
Light green
Access the link: https://mybuildings.abb.com, and click "Reg-
ister". Fill in the form as required to register an account. Then
activate the user account when you receive the email sent
from the MyBuildings portal.
Log into App
Download the App from Google Play or
the Apple Store via the keyword "ABB
Welcome". Then install the relevant App
on a mobile or tablet.
On the mobile phone/tablet, click
open the app, select "Setup Welcome"
and use your MyBuildings portal creden-
tial to log in.
7
to