Installing the battery when the cross strap is attached
- Optional
1. Insert the battery into the battery slot.
2. Slide the battery into the slot until it clicks into place and locked.
3. Slide the velcro strap into the strap holder.
4. Affix the velcro strap.
5. Follow the procedure in
Tarjeta del módulo de identidad de suscripciones
(SIM)
Removing uSIM
1. Follow the procedure in
2. Remove the left battery.
3. Lift the latch [1] and pull the SIM slot cap [2].
4. Pull the SIM from the slot until it is released [3].
NOTE:
Use a flat pointed scribe to ease removing the SIM.
5. Press the SIM slot cap to initial state.
6. Install the:
a. Left
battery
14
Extracción e instalación de componentes
After working inside your
Before working inside your
computer.
computer.