Installing front camera
1. Align the front camera circuit board over the camera chassis.
NOTE:
Opposite side of the camera circuit board is placed to connect cable in the connector.
2. Connect the front camera cable and plug in the cable to the connector.
3. Flip the front camera circuit board, and align front camera circuit board with screw hole.
4. Align the camera lens case to the camera placeholder.
5. Replace the screw to secure the front camera circuit board on the system board.
6. Slide the lens shutter in the lens channel and push towards left.
7. Install the:
a.
Display assembly
b.
Battery
8. Follow the procedure in
32
Extracción e instalación de componentes
After working inside your
computer.