Installing System Board; Docking Board; Removing Docking Board - Dell Latitude 12 Manual Del Propietário

NOTE: Ensure all connected cables are disconnected prior to lifting the system board.

Installing system board

1. Align the system board with the screw holes on the tablet chassis.
2. Replace the screws (7) to secure the system board to the tablet chassis.
3. Connect the cables to respective slot that were disconnected while removing the system board. See
4. Install the:
a. WWAN
b. WLAN
c. System fan
d. Heat sink
e. Display assembly
f. SSD
g. Battery
h. Micro SIM
5. Follow the procedure in

Docking Board

Removing docking board

1. Follow the procedure in
2. Remove the:
a. Battery
b. Display assembly
c. Heat sink
d. System fan
44 Extracción e instalación de componentes
After working inside your
Before working inside your
computer.
computer.
removing system board