l.
Disconnect the microphone latch, and remove the cable [1].
m. Disconnect the smart card reader latch, and remove the cable [2].
n. Disconnect the cable [3], and remove the cable from the routing clip [4].
o. Remove the screws(2) that secures the front camera cable [5].
p. Remove the bracket that covers the front camera cable [6].
q. Lift and remove the front camera cable from the connector [7].
r. Release and gently pull the NFC contactless smart card and smart card cable through the narrow slit in the rubber gasket
[8].
40
Extracción e instalación de componentes