Alcatel Onetouch Go Watch SM03 Manual Del Usuario página 17

Wi-Fi/Bluetooth transferring is slower than expected:
GB
If other Bluetooth devices are also paired and connected to
your phone, it is normal for the file transfer rate via Bluetooth
to decrease. It is also normal behaviour for the Wi-Fi speed
to be impacted and you may experience slower performance.
How many BT 4.0 Low Energy (BLE) devices can be
connected to the phone at most?
5 BLE devices can be connected to the phone at the same time.
After Onetouch Move is installed and GO WATCH is
connected to your phone, the battery consumption
speed of your phone increases.
This is normal and the consumption includes:
• Keeping connection between your GO WATCH and phone
• File transfer between your GO WATCH and phone
• Disconnection, device scanning, and re-connection
Vibration does not work.
• Charge and confirm that the battery works.
• Make sure the connection between your GO WATCH and
phone is not interrupted.
GO WATCH vibrates unexpectedly.
• Check whether you have a notification.
• Make sure your GO WATCH is not too far away from
your phone.
27
Go Watch_SM03_Regulation Leaflet_For ALWE_20151028.indd 27-28
Your GO WATCH does not respond.
Long press the Power key for 10 seconds to restart GO
WATCH.
Factory reset
If the instructions above fail to solve the problem, try to reset
your GO WATCH.
In Onetouch Move, touch , then touch Watch\Settings\
Factory Reset to reset your GO WATCH.
Long press the Power and Back keys together for 10 seconds
to reset your GO WATCH.
GB
28
2015/10/28 16:49:02