Power On/Off; Date/Time Setting - Olympus CAMEDIA C-725 Ultra Zoom Manual Básico

1 C725UZBasic-E1

Power on/off

1
Before turning the camera on, press
the tabs on the lens cap to remove it.
2
Press the power switch to turn on the
camera.
● The lens moves out when the mode
dial is not set to
● The monitor turns on.
● To turn off the camera, press the power
switch again.
● If the date/time has been returned to
the factory default setting, "Y/M/D"
appears on the monitor

Date/time setting

1
Set the mode dial to
the camera.
2
Press .
● The top menu is displayed.
3
Ñ
Press on the arrow pad to select
4
When is selected on the screen, press
format.
● Select any one of the following formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the procedure used when the date
and time settings are set to Y-M-D.
5
í
Press to move to the year (Y) setting.
6
Ññ
Press to set the year. When the year is set, press
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
● The first two digits of the year cannot be changed.
7
Press .
● For a more accurate setting, don't press
The clock starts when you press the button.
8
To turn the camera off, press the POWER switch.
● The lens retracts.
All manuals and user guides at all-guides.com
04.2.19 1:42 PM
.
, then press the POWER switch to turn on
.
Page 15
Lens cap
Ññ
to select the date
í
to move to
É
.
until the clock hits 00 seconds.
En
15