Operation And Use; Basic Settings - Auriol AFT 77 B2 Manual De Instrucciones

Operation and use

Basic settings

If the device is unable to synchronize with the WWVB signal, you can
also set the temperature station manually.
♦ To configure the basic settings, press and hold the
for approximately 3 seconds.
♦ Press the
hour format (12- or 24-hour format).
♦ Press the
flashes on the time panel 6.
♦ Press the
# Time zone
Pacific Standard Time (PST)
Mountain Standard Time (MST)
Central Standard Time (CST)
Eastern Standard Time (EST)
♦ Press the
flashes on the time panel 6.
♦ Press the
♦ Press the
flashes on the time panel 6.
♦ Press the
♦ Press the
flashes on the time panel 6.
AFT 77 B2
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 19 _345564_AFT77B2_Funk-Temperaturstation_LB9.indb 19
flashes on the time panel 6.
button 0 or the button w to select the required
button q to confirm your entry.
button 0 or the button w to set the desired time zone:
button q to confirm your entry. The hour display
button 0 or the button w to set the desired value.
button q to confirm your entry. The minute display
button 0 or the button w to set the desired value.
button q to confirm your entry. The seconds display
button q
(time zone setting)
│
US - EN 19 ■
10.09.20 15:3 10.09.20 15:34