Displays In Basic Mode - Auriol AFT 77 B2 Manual De Instrucciones

Displays in basic mode

After the temperature station has received the signal from the outdoor
sensor and the WWVB signal, the device enters basic mode. In basic
mode, the temperature station displays the following information:
Alarm 1 panel t and Alarm 2 panel 5
the or symbol appears next to the corresponding alarm time. If
the snooze function is activated,
alarm panel.
The time panel 6
received. If you live in an area that does not recognize daylight saving
time (i.e. parts of Arizona and Indiana), you must turn off this function
(see Basic settings section).
│
■ 16 US - EN
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 16 _345564_AFT77B2_Funk-Temperaturstation_LB9.indb 16
The alarm times are displayed
in 12-hour format by default.
When the alarm is turned on,
also flashes on the corresponding
By default, the time is displayed in 12-hour
format. During summer,
saving time) is displayed. This display is
only shown if the WWVB signal is being
(daylight
AFT 77 B2
10.09.20 15:3 10.09.20 15:34