Displaying The Maximum/Minimum Temperature; Changing The Temperature Unit Of The Outdoor Sensor; Battery Replacement Indicator - Auriol AFT 77 B2 Manual De Instrucciones

Displaying the maximum/minimum temperature

Once the power supply and the connection to the outdoor sensor have
been established, the maximum and minimum temperatures are auto-
matically recorded and saved by the temperature station.
♦ In basic mode, press the
shown on both temperature panels, and the highest measured
temperature for indoors and outdoors is displayed.
♦ Press the
lowest measured temperature for indoors and outdoors is displayed.
♦ Press the
outdoor temperatures.

Changing the temperature unit of the outdoor sensor

On delivery, the temperature unit is preset to degrees Fahrenheit ( ).
♦ Open the battery compartment g on the back of the device by
sliding the battery compartment cover h in the direction of the arrow.
Press the °C/°F button g to change the temperature unit on the
♦
outdoor sensor display p.
♦ Close the battery compartment g again.

Battery replacement indicator

If the battery symbol is shown on the indoor temperature panel 7,
the batteries in the temperature station should be replaced as soon as
possible (see also section Operating the temperature station).
If the battery symbol is shown on the outdoor temperature panel r
or on the outdoor sensor display p, the batteries in the outdoor
sensor should be replaced as soon as possible (see also section
Operating the outdoor sensor).
AFT 77 B2
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 23 _345564_AFT77B2_Funk-Temperaturstation_LB9.indb 23
button 0 once. The
button 0 twice: the symbol is shown and the
button 0 again to show the current indoor and
symbol is
│
US - EN 23 ■
10.09.20 15:3 10.09.20 15:34