Sime FORMAT.zip 4 25 OF Manual Del Instalacion página 78

IT
ES
and pull the panel forward until it can be tilted
downward.
PT
To access the components of the electrical
panel, unscrew the four screws holding the
protective guard in place (6).
GB
GR
RO
RUS
ATTENTION: After having removed the three screws, take out
the panel to tilt it downward.
KEY
1 Thermohydrometer
2 Time programmer seat
3 Rotary switch
4 Main PCB
5 Earth faston
6 Control panel protection
7 Cover (TA)
8 Connector (TA)
9 Fixing screw
76
2. 1 1.2 Room stat connection (fig. 12)
To gain access to connector "TA", remove
the control panel cover (7) and connect the
room stat to the terminals 10-11 after
6 5
2 3
1
having removed the jumper.
The thermostat or timer-thermostat,
recommended for better room tempera-
ture control, must be class II as specified
by standard EN 60730. 1 (clean contact).
9
7 4
8
Fig. 12