Field Speci Cation Setting Mode Of Wired Remote Controller - Samsung AE050JXYDEH Manual Del Usuario

Field speci cation setting mode of wired remote controller

Use of eld speci cation setting mode
Data
1. If you want to use the eld speci cation setting mode for your wired remote controller, press the Set and [∨]
buttons at the same time for more than 3 seconds.
2. Refer to the list of eld speci cation for your wired remote controller on the next page, and select the desired menu.
f Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu setting
f
screen.
f Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter data setting screen.
f
f When you enter the setting stage, the current setting value will be displayed. f
f Refer to the chart for data settings. f
f Using the [∧]/[∨] buttons, change the setting value and press the Set button to save the setting value. Setting value
f
will be displayed when it is saved.
f Press the [＜] button to move previous setting value.
f
f While con guring the sub manu setting, press the ESC button to exit to normal menu.
f
• While con guring the setting, press the ESC button to exit to the sub-menu setting screen without saving your
changes.
NOTE
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
Main menu Sub-menu
ENGLISH-34