Tabla de contenido
Publicidad
Use of eld speci cation checking mode
Data
1. If you want to use the eld speci cation checking mode for your wired remote controller, press the Set and [∧]
buttons at the same time for more than 3 seconds.
2. Refer to the list of eld speci cation for your wired remote controller on the next page, and select the desired menu.
f Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu checking
f
screen.
f Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter data checking screen.
f
f When you enter the checking stage, the current setting value will be displayed.
f
f Press the [<] button to move previous setting value.
f
f While con guring the sub manu setting, press the ESC button to exit to normal menu.
f
• While con guring the checking, press the ESC button to exit to the sub-menu setting screen.
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
NOTE
Main menu
Sub-menu
ENGLISH-35
Publicidad
Tabla de contenido
