INSTALLATION INSTRUCTIONS FOR MULTIPLE UNITS (cont.)
STEP 15 INSTALL TOEKICK AND
VENT
Locate the toekick, vent and screws (removed
earlier).
A custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template.
Reinstall the vent using the screws removed earlier.
Reinstall the toekick .
Supplied Toekick
Installation Instructions
Vent Holes
STEP 16 INSTALL FRONT TRIM
Attach front trim piece, provided in the Heater
Unification Kit, along length of units from top to bottom
by snapping into the clips that were attached in step 2.
Spacer Clip
30
Trim cover
snaps into the
front spacer
clips
31-1000169 Rev. 4