Failure to follow all of these instructions may result in death or serious injury!
INDEX
1. GUIDELINES FOR MATCHING TOW VEHICLE AND TRAILER
2. ASSEMBLY INSTRUCTIONS
3. CEQUENT PERFORMANCE PRODUCTS, INC. LIFETIME LIMITED WARRANTY
GUIDELINES FOR MATCHING HITCH TRUCK AND TRAILER
Failure to check and follow tow ratings could result in tow vehicle
Trailer and its contents together must not exceed truck, hitch and/or trailer tow
ratings.
Towing vehicle must have a manufacturer's rated towing capacity equal to or
greater than the gross trailer weight (dry weight of the trailer plus payload of the
trailer). (Figure 2)
Gross weight of trailer must not exceed fifth wheel hitch rating.
King pin weight must not exceed fifth wheel rating (Figure 3). If in doubt have king
pin weight measured by a qualified technician.
Figure 2
1. Check Tow Ratings:
Vehicle Tow Rating:_______________________.
REESE
Elite
Series Hitch Rating:__________________.
Gross Trailer Weight (Figure 2):______________.
*Trailer weight should be the lowest of these recorded ratings for safe towing conditions.
2. Cequent Performance Products, Inc. hitches are designed for use with recreational fifth wheel trailers only. Hitch applications
other than recreational fifth wheel trailers must be approved in writing by Cequent Performance Products, Inc. Engineering
Department.
3. Use only a SAE 2" kingpin with your REESE
4. Approximately 15%-25% of trailer weight should be on hitch (Pin Weight)(Figure 3).
Figure 3
30868N – 5/23/14 REV. E
damage or truck and trailer separation while towing.
FACTORY TRAILER + FULL LIQUID
AND GAS TANKS + CARGO, ETC.
Elite
15-25%
GROSS TRAILER
WEIGHT
(PIN WEIGHT)
PCN3694
©2011, 2014 CEQUENT PERFORMANCE PRODUCTS, INC.
WARNING:
WARNING:
= GROSS TRAILER WEIGHT
Series Fifth Wheel Hitch.
GROSS TRAILER
P. 2-4
P. 5-9
75-85%
WEIGHT
P. 10
2
Printed in Mexico