Troubleshooting Tips - GE UVD6301S Manual Del Propietario E Instrucciones De Instalación

TROUBLESHOOTING TIPS

Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Fan does not work
Vent does not work
16
Possible Cause
The vent is not fully extended.
The vent is not plugged into an outlet.
The button did not engage the lift
motor.
The circuit breaker may have tripped.
Sufficient makeup (replacement) air is
required for exhausting appliances to
operate to rating.
What To Do
Press the button on the top cover.
Plug the vent into a 120V power outlet.
Hold down the button for a couple of seconds
to activate the motor.
Check the circuit breaker— reset if necessary.
Check with local building codes, which may
require or strongly advise the use of makeup
air. Visit GEAppliances.com for available
makeup air solutions.
49-2000733 Rev. 1