Adjustment Of Shoulder Straps - Solo 468 Manual Del Usario

Operating Hints
8. Operating Hints
Prior to operating and prior to each start, check the
blower unit's condition with regard to throttle
activation, on/off switch, protective covers,
carrying straps and also for any fuel leaks.
Take care not to inhale exhaust fumes. Do not
operate the blower in closed areas.
 Prior to starting the engine and during all jobs,
the operator needs to be securely and safely
positioned.
 The engine starting site should be at least 3
meters away from the refueling site.

8.1 Adjustment of shoulder straps

Fig. 6
Put blower on back and secure carrying straps
with quick-coupling locks (13).
The straps can be adjusted to the required length
with friction slides. Simply pull down both strap
ends to tighten straps (a).
Strap tension can be released by lifting both
friction slides (b).
Note:
The shoulder straps are correctly adjusted when
the back plate rests firmly against the back of the
operator.
ENGLISH 8
8.2 Active components of the operating
handle
To release the throttle control (2):
Hold the handle with your right hand,
 the throttle control lock (3) is activated by
the flat of your hand,
 the throttle control is released.
On/Off Switch (1) "I"  operating position
On/Off Switch (1) "0"  engine off
Fig. 7