Using Your Refrigerator; Temperature Setting Button; Defrost - Grundig GTMU 10130 N Manual Del Usuario

5. Using your refrigerator

5.1 Temperature setting button

The interior temperature of your
refrigerator changes for the
following reasons;
•
Seasonal temperatures,
•
Frequent opening of the door
and leaving the door open for
long periods,
•
Foods put into the refrigerator
without decreasing the
temperature to room
temperature.
•
The location of the refrigerator
in the room (eg. exposing to
sunlight)
You may adjust the varying
interior temperature using the
thermostate. If the ambient
temperature is higher than 32°C,
switch the thermostate button to
maximum position.
Figures in this user manual are schematic and may not
C
match the product exactly. If the subject parts are not
included in the product you have purchased, then those parts
are valid for other models.

5.2 Defrost

It is normal when ice particles
form on the back wall during the
operation. These do not need to
be scratched or wiped out. Your
refrigerator makes automatical
defrost. Water formed after
defrost flows into the evaporation
container via the drain pipe
through the water collecting
chute, and here it evaporates
automatically.
•
Check periodically whether the
evaporation pipe is clogged and
unclog it using the stick in the
hole if necessary.
IT
DE
17