Rs.232 Output; Parameters - Giropes Baxtran BAT Serie Manual Del Usuario

7. RS.232 OUPUT
The BAT series scales can be ordered with an optional RS-232 output.
SPECIFICATIONS:
• RS-232 output of weighing data
• ASCII code
• 9600 Baud
• 8 data bits
• No Parity
CONNECTOR: 9 pin d-subminiature socket
Pin 2
Pin 3
Pin 5
BAT scales can be connected with PC, remote display or mini printer, setup see section 8.

8. PARAMETERS

The scale has 8 parameters that can be set by the user plus a method of entering the calibration section.
To set parameters press the
The display will show the first function, "F1 UNIT".
Pressing the
Pressing key will allow you to set the function. Use the
Note: when display shows "TECH", press
key, and press
RXD
TXD
GND
key during self checking.
key will cycle through the other functions.
key to enter technical parameters setting mode.
Input Receiveng data
Output Transmission data
- Signal Ground
key to leave a parameter unchanged.
key to enter, display shows "PIN", press
USER'S GUIDE EN EN
, ,
31