Harbor Breeze LP8210LAZ Manual Del Usuario página 13

OPERATING INSTRUCTIONS
2. To make fan operational, install 12-volt battery
(included in remote control package) into the
remote (J).
3. Follow the below steps to set the remote (J):
a) With the fan's power off, arrange code
switches to desired code setting.
b) After installing the unit and restoring
power to the fan, press and hold the "SET"
button 1~5 seconds. You must press the
"SET" button within 60 seconds of restoring
power to the fan.
c) The fan will start to run and begin the
control setting process. The fan will run in
both directions for a total of approximately 5
minutes.
d) When the fan stops after approximately 5
minutes the control and speed setting
process is complete and the fan is ready for use.
CAUTION
If you are not expecting to use the remote for a
long period of time, remove the battery to
prevent damage to the remote. Be sure to store
the remote away from excess heat or humidity.
2
3
13
Lowes.com/harborbreeze
J