Uline H -1027 Manual De Instrucciones página 10

VALVE AND TUBE O-RING REPLACEMENT
1. Loosen screws with a flat screwdriver. (See Figure 27)
2. Remove spring with needle nose pliers.
(See Figure 28)
Figure 27
Figure 29
PAGE 10 OF 33
OPERATING INSTRUCTIONS CONTINUED
C-ring
3. Remove C-ring with C-ring pliers.
(See Figure 29)
4. Remove valve and tube with needle nose pliers.
(See Figure 30)
Figure 28
Valve and Tube
Figure 30
0421 IH-1027