Valance; Extension Brackets; Spacer Blocks; Hold-Down Brackets - Levolor Roman Shades Instalación

INSTALLATION - ADDITIONAL COMPONENTS
INSTALL VALANCE
•
Hook the top of the valance over the
top lip of the headrail.
•
Carefully press the valance down
and back against the headrail until
the valance clips into place.
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance
for obstructions.
•
Outside mounting extension brackets will
provide 1–3" clearance between the headrail
and mounting surface. Assemble extension
bracket as shown.
•
Secure an extension bracket to each standard
mounting bracket.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide
an additional ⁄
3
•
If spacers are used, longer screws may
be required to ensure a secure installation
(not provided).
! CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause shade to fall resulting in possible injury.
HOLD-DOWN BRACKETS (optional)
•
Ideal for doors, hold-down brackets
prevent shade from swaying. Assemble
as shown to each side of bottom rail.
16
Cord Loop Lift Control
" clearance as shown.
8

Valance