INSTALLING ADDITIONAL COMPONENTS
INSTALL VALANCE
Be sure to complete motorization set-up before installing the valance.
WOOD VALANCE:
•
Hook the top of the valance over the top lip of the headrail.
•
Carefully press the valance down and back against the headrail until the valance
clips into place.
WOOD VALANCE RETURNS (outside mount only)
•
Insert the clips into the groove on the back side of the valance and then rotate
the clip 90°.
•
Insert return clips as far as they will go into each end of the valance.
•
Align the return clips with the slots on the headrail and slide into place.
CLASSIC VALANCE
•
Hook the top of the valance over the top lip of the headrail.
Return clip
•
Carefully press the valance down and back against the headrail until the valance
clips into place.
Hook-and-loop strips
22
Battery-Powered Motorized Operating System
Return clip
Valance
Hook-and-loop strips
Valance return
Return clip
Return clip
Valance