Installing Additional Components Installing Cord Cleat; Installing The Valance; Extension Brackets; Spacer Blocks - Levolor Roman Shades Instalación

CORDED CORD CLEAT
Refer to Cord Cleat Installation Instructions included
with cord cleat for the proper way to install cord cleat.
WARNING: Always wrap the cords around the cleats in a figure eight,
!
up high, out of reach of children. Young children can STRANGLE in cords.
They can also wrap around their neck and STRANGLE.
INSTALL VALANCE
•
Align the holes in the valance rail with
the holes in the top of the headrail.
•
Press the push fasteners fully into the
holes to secure the valance in place.
•
Valance returns for outside mount are
self-supporting and do not require
additional installation.
EXTENSION BRACKETS (optional)
•
Optional extension brackets offers clearance
for obstructions.
•
Outside mounting extension brackets will
provide 1–3" clearance between the headrail
and mounting surface. Assemble extension
bracket as shown.
•
Secure an extension bracket to each standard mounting bracket.
SPACER BLOCKS (optional)
•
Outside mounting spacer blocks will provide an
additional ⁄ " clearance as shown.
3
8
•
If spacers are used, longer screws may be required
to ensure a secure installation (not provided).
! CAUTION: Do not use more than one spacer block. Using more than one
spacer block could cause shade to fall resulting in possible injury.
INSTALLATION - ADDITIONAL COMPONENTS
Push fastener
Corded Lift Control
Valance
15