Operation; Operating The Shade - Levolor Natural Shades Instalación

CORDED
• Cords, whether installed on the left or right side, have the same locking
mechanism. To raise the shade, pull the cord and release it when the shade
reaches the desired height. To lower the shade, gently pull the cords toward the
center of the window,and then release to lower the shade while maintaining
constant tension on the cords.
NOTE: If your shades have hold-down brackets, unhook the bottom rail
before raising.
Do not force the cord; if the shade does not raise or lower, check for objects
preventing proper operation.
TOP-DOWN BOTTOM-UP
• To lower your shade from the top, use the left-hand cords. Pull the cords gently
toward the center of the window, and then release to lower the shade. Gently pull
the cords to the left to lock the shade in place.
• To raise your shade back to the top, gently pull the left-hand cords toward the
center of the window to unlock it, and then pull the cords to raise the shade.
• To raise or lower the bottom of your shade, follow the same process as above,
using the right-hand cords.
Bottom-Up Shade
Top-Down/Bottom-Up Shade

OPERATION

Corded Lift Control
19