Care And Cleaning; Brush Replacement - Everbilt EBTP1 Guía De Uso Y De Mantenimiento

Care and Cleaning

Do
□
When the power is disconnected, inspect the pump
suction screen and remove all debris, then plug the
pump back into the GFCI outlet.
If the pump is not running properly
□
Remove the impeller cover screws.
□
Remove the pump casing cover and metal spacer.
□
Inspect the O-ring and impeller. If the impeller is worn out, replace the impeller. Normal impeller lifetime will be
around 360 hours.
□
Contact the Customer Service Team at 1-844-251-7446 or visit HOMEDEPOT.COM for any replacement parts.
NOTE: A replacement impeller is included in the box
with this pump.
1 2
3 4 5 6 7
9

Brush Replacement

This is a brush-type motor. Depending on usage, may last up to 360 hours. The brushes can become worn and the
motor may no longer operate. If the pump is no longer operating when plugged in, the brushes may need to be
replaced. Included in this box is a spare set of brushes. If you need another set, please call customer service to order
replacement brushes. Brushes are not covered under the warranty, as it is a normal maintenance item.
To replace the brushes:
□
UNPLUG THE PUMP FROM THE POWER OUTLET.
□
Unscrew the brush caps. Using a small flathead screwdriver, pry open the retaining clip. Remove the brushes.
□
ALWAYS replace both brushes at the same time to prevent uneven motor operation.
□
Re-insert the new brushes in the same way that the old brushes were removed.
NOTE: A replacement set of brushes is included in
the box with this pump
10
Do Not
□
Do not disassemble the motor housing. This motor
has NO repairable internal parts, and disassembly
may cause leakage or dangerous electrical wiring
issues.
□
Do not lift the pump by the power cord.
Item
1
2
3
4
5
6
7
8
9
8
10
7
Please contact 1-844-251-7446 for further assistance.
Description Qty
Screw
Pump casing cover
Metal spacer
Impeller
Packing
O-ring
Pump head
Clear suction hose
Puddle strainer
Suction strainer
HOMEDEPOT.COM
4
1
1
1
1
1
1
1
1
1