Publicidad

Idiomas disponibles

Idiomas disponibles

with Clear Duty® Technology
FASCIA LIGHTS - 4"
EMPS202KE-(x) - ORV SPOT QUICK MOUNT
EMPS202KF-(x) - ORV SPOT SCREW MOUNT
EMPS202KG-(x) - ORV SPOT STUD MOUN
WARNING
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat build-up
and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner's
Manual for deployment zones.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal or local
chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at power source.
•Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
1
EMPS202KP-W - ORV FLOOD QUICK MOUNT
EMPS202KQ-W - ORV FLOOD SCREW MOUNT
T
EMPS202KR-W - ORV FLOOD STUD MOUNT
EMPS202KG-(x) SHOWN
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
HOOK-UP & TECHNICAL SPECIFICATIONS
RED
+Vdc
5A FUSE
DIM
Red
White, Amber,
Blue, Green
Protected by U.S. Patent 10,703,260 and Patents Pending
https://soundoffsignal.com/legal/patent-notification/
NOTICE:
Improper use or installation may void warranty coverage.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
WIRE HOOK-UP TABLE
WIRE COLOR
BLACK
RED
GREEN
BLACK
GREEN
TECHNICAL SPECIFICATIONS
Dimensions (From Mounting Surface)
4" Screw Mount:
4.52"L x 0.92"H x 0.42"D
4" Stud, Threaded Mount:
4.04"L x 0.92"H x 0.42"D
4" Quick Mount:
4.04"L x 0.92"H x 0.42"D
Input Voltage:
4" CURRENT CONSUMPTION (Amps)
12.8Vdc
Peak
Average
Peak
0.62
0.36
0.31
0.90
0.60
0.45
WARNING
!
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range.
FUNCTION:
Power (Primary)
Ground
DIM
9-32Vdc
25.6Vdc
Average
0.18
0.30
mpower Spot 0121

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Soundoff Signal mpover EMPS202KE

  • Página 1 Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/. If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
  • Página 2 INSTALLATION: Stud Mount (Figure 1) 1. Pre-Drill per stud mount pattern indicated on page 11 (3") or per the supplied mounting template (4"). 2. Clean the surface as required. 3. Deburr hole as required. with Clear Duty® Technology 4. Make wire connections and feed wire through the drilled wire hole.
  • Página 3 INSTALLATION: Edge-Mount Bracket 1. Install Heat Sink onto “mPOWER Stud Mount, Threaded” light as ndicated. Wire passed through center hole. 2. Install bracket onto “mPOWER Stud Mount, Thread” light as indicated. Wire passed through rear relief and into lower with Clear Duty® Technology edge grip relief.
  • Página 4 INSTALLATION: Multi-Mount Bracket 1. Pre-drill mount holes as required (bracket holes and spacing are indicated on page 10 (4") or page 11 (3"). 2. Place bracket onto desired vehicle’s surface and secure with with Clear Duty® Technology screws (not provided). 3.
  • Página 5 INSTALLATION: Quick Mount w/Quick Clip 1. Prep surface with supplied alcohol wipe. 2. Feed wires through quick clip as shown. 3. Remove adhesive liner on the light and install clip to light. with Clear Duty® Technology Make sure to properly align ends before placing down. 4.
  • Página 6 INSTALLATION: Grille Mount Back Plate (EMPS202KG-(x)) 1. Find placement for mpower light location. ® 2. Use the Stud Mount templates on Page 11, for a 4" mpower ® light, or Page 12, for a 3" mpower light. Drill 3 holes in the ®...
  • Página 7 with Clear Duty® Technology OVER-VOLTAGE PROTECTION When an over-voltage condition is detected, the module will flash an over-voltage warning pattern of 50mS ON/950mS OFF to alert of the over-voltage condition and protect the electronics from damage due to heat/voltage. THERMAL COMPENSATION PROTECTION The LED module is designed to provide maximum power output while providing protection to the electronic components by reducing the output power during normal operation.
  • Página 8 REVISION LOG DESCRIPTION STUD MOUNT, TH SCREW MOUNT, 4" STUD MOUNT, THREADED, 4" CREW MOUNT, 4" with Clear Duty® Technology FASCIA LIGHTS - 4” 4" SCREW MOUNT 4" THREADED STUD MOUNT 0.98±0.01 0.98±0.01 0.98±0.01 2.15±0.01 2.15±0.01 2.15±0.01 25±0 25±0 25±0 54.50±0.25 54.50±0.25 54.50±0.25...
  • Página 9: Especificaciones Tecnicas

    El uso o la instalación incorrecta podrían anular la cobertura de la garantía. Para revisar nuestra Declaración de garantía limitada y Política de devolución para este o cualquier producto de SoundOff Signal, visite nuestro sitio web www.soundoffsignal.com/sales-support. Si tiene alguna consulta con respecto a este producto, comuníquese con Servicios técnicos de lunes a viernes de 8 a.
  • Página 10: Montaje

    INSTALACIÓN: Montaje con pasadores roscados (Figura 1) 1. Perforar utilizando el patrón de los pasadores de montaje en pagina 11(3”) o utilizando el patrón suministrado (4”). 2. Elimine las rebabas del orificio según sea necesario. 3. Limpie la superficie según sea necesario. with Clear Duty®...
  • Página 11 INSTALACIÓN: Soporte de montaje en el borde 1. Instale el disipador de calor en la luz “mPOWER Montaje con pasador roscado” según se indica. Pase el cable por el orificio central. 2. Instale el soporte en la luz “mPOWER Montaje con pasador with Clear Duty®...
  • Página 12 INSTALACIÓN: Soporte de montaje múltiple 1. Preperfore los orificios de montaje según sea necesario. Los orificios del soporte y el espaciado se indican en la página 10 (4") or página 11 (3"). 2. Coloque el soporte sobre la superficie deseada del vehículo y with Clear Duty®...
  • Página 13 INSTALACIÓN: Montaje rápido con pasador rápido 1. Superficie de preparacion con toallitas con alcohol suministradas. 2. Pase los cables a través del pasador rápido como se muestra. 3. Retire el revestimiento adhesivo sobre la luz e instale la with Clear Duty® Technology brida en la luz.
  • Página 14: Ciclo De Funcionamento

    with Clear Duty® Technology PROTECCIÓN CONTRA SOBRETENSIÓN Cuando se detecte una condición de sobretensión, el módulo emitirá un patrón de advertencia de sobretensión de 50 mS ENCENDIDO/950 mS APAGADO para alertar acerca de la condición de sobretensión y proteger los componentes electrónicos del daño causado por el calor/la tensión.
  • Página 15 REVISION LOG DESCRIPTION STUD MOUNT, T SCREW MOUNT, 4" STUD MOUNT, THREADED, 4" CREW MOUNT, 4" with Clear Duty® Technology LUCES SUPERFICIALES - 10.16cm PATRÓN DE ORIFICIO DE MONTAJE CON TORNILLOS PLANTILLA ROSCADA DE MONTAJE CON TORNILLOS 0.98±0.01 0.98±0.01 0.98±0.01 2.15±0.01 2.15±0.01 2.15±0.01...
  • Página 16 QUICK MOUNT, 3" , 3"-FD STUD MOUNT, THREADED, 3"-SL with Clear Duty® Technology STUD MOUNT, THREADED, 3"-FD LUCES SUPERFICIALES - 7.62cm SCREW MOUNT, 3" 0.875±0.01 0.875±0.01 22.23±0.25 22.23±0.25 PATRÓN DE ORIFICIO DE MONTAJE RÁPIDO SOPORTE DE MONTAJE MÚLTIPLE PATRÓN DE ORIFICIO DE MONTAJE CON TORNILLOS 50mm 0.43±0.01 0.43±0.01...

Este manual también es adecuado para:

Mpover emps202kfMpover emps202kg

Tabla de contenido