Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
with Clear Duty® Technology
OVER-VOLTAGE PROTECTION
When an over-voltage condition is detected, the module will flash an over-voltage warning pattern of 50mS ON/950mS OFF to alert of the over-voltage condition and protect the electronics from damage
due to heat/voltage.
THERMAL COMPENSATION PROTECTION
The LED module is designed to provide maximum power output while providing protection to the electronic components by reducing the output power during normal operation.
REMOTE MODE: FOR USE WITH bluePRINT
The light intensity can be controlled by modulating the signal to the red power wire with the green wire floating. A frequency of 100Hz is recommended. The light output vs. input voltage duty cycle is
shown on the table below:
1.800.338.7337 / www.soundoffsignal.com
7
SYSTEM ONLY
®
Input Duty
(%)
Light Output (%)
< 50
Not Supported
50-54
55-59
60-64
65-69
70-74
75-79
80-84
85-89
90-94
>=95
5
10
15
25
35
45
55
65
75
100
mpower Spot 0121
Publicidad
Tabla de contenido
