Graco SNUGRIDE 30 Manual Del Usuario página 13

2-B Remove Car Seat from Base
1. To Remove Car
Seat from Base
From the back of the
car seat, squeeze the
base release handle
and lift the car seat
out of the base.
2-C Attach Car Seat to Base
2. Attaching Car
Seat To Base
Align the locking bar at
the front of the car seat
with the locks in the
base. Set car seat in the
base. Push down on
the front of the car seat.
You will hear a "click"
when it is locked.
Pull up on the front
corners of the seat to
make sure it is locked.
13