Operation; The Working Technique - Husqvarna RA850 Manual Del Usuario

SAVE THESE
INSTRUCTIONS

The working technique

WARNING: Branches or grass can get
caught between the cutting attachment
guard and the cutting attachment. Always
stop the engine/motor before you clean the
cutting attachment.
• Use full throttle/speed when you cut and decrease to
idle speed after each cut.
CAUTION: Engine/motor damage can
occur if the engine runs for too long at
full throttle without load.
Recommended use for the cutting
attachment
The cutting attachment blades moves with a small angle
and can cut in all directions. Move the cutting
attachment along the ground at a height where the
support cup touches the ground. Use the cutting
attachment to cut:
• Park areas and road edges.
• Road side and near fences.
8

Operation

• Around stones and trees.
• Near water.
CAUTION: Do not put the gear housing
in water.
1050 - 002 - 12.04.2019