Basic Shooting Operations - Panasonic AW-HE100E Manual De Usuario

Basic shooting operations

1
Set the subject brightness to the appropriate level.
2
Turn on the power of all the units and devices in the system.
Note
 If the accessory wireless remote control is going to be used, be sure to install the two size "R6"
or "LR6" dry batteries inside.
Do not use any other kind of batteries.
(The batteries are obtained separately.)
3
Select the unit to be operated.
Even when using only one unit, it must still be selected from the wireless remote control or controller.
4
Select the shooting mode.
Select one of the four preset shooting modes, each of which corresponds to a set of circumstances in which the subject will
be shot.
Select the mode that satisfies the shooting conditions and suits your preferences.
When continuing to shoot in the same circumstances, there is no need to select another mode.
5
Start shooting.
(After shooting, turn off the power of all the units and devices in the system.)
With the basic operations, it is assumed that the focus, iris and white balance will be adjusted automatically (as per the
factory settings).
If the settings have already been changed and the original settings are to be restored, refer to the "What to do when
encountering problems in the basic shooting operations" (page 22) and "Shooting mode setting menus" (page 44) in "Setting
the menu items".
14 (E)