More advanced operations
Manual shooting
Manual adjustment of focus
Manual adjustment of iris
Manual adjustment of shutter speed
Manual adjustment of gain
Preset memories
Up to 100 settings for the camera direction (panning
and tilting), zoom, focus and also iris can be registered
in the preset memories, and called.
The number of settings that can be registered and
called depends on the type of wireless remote control
(12 settings) or controller that is used for operation.
White balance adjustment
This adjustment is performed to express the white
accurately. Its setting also has an effect on the colour
tones of the entire screen.
It must be performed when using the unit for the
first time or when the unit has not been used for a
prolonged period.
It must be performed when the lighting conditions or
brightness has changed.
Once the white balance has been attained, no further
adjustment is required provided that the unit is going
to be used under the same conditions.
Black balance adjustment
This adjustment is performed to express the black
accurately. Its setting also has an effect on the colour
tones of the entire screen.
It must be performed when using the unit for the
first time or when the unit has not been used for a
prolonged period.
It must be performed when the ambient temperature
has changed significantly and at the change of the
seasons.
Once the black balance has been attained, no further
adjustment is required provided that the unit is going
to be used under the same conditions.
Black level (total pedestal) adjustment
This adjustment is performed to align the black level
(pedestal level) of a multiple number of cameras.
Ask your dealer to perform this adjustment.
Genlock adjustment
This adjustment is performed to achieve phase
alignment by applying external synchronization
(genlock) when a multiple number of cameras will be
used or when the unit will be used in combination with
other devices.
Ask your dealer to perform this adjustment.
23 (E)