Panasonic AW-HE100E Manual De Usuario página 50

Setting the menu items
Other settings (Other Set) menu
Apart from the gamma correction level selection (Gamma)
setting, the settings of the Other Set menu are common to
all the shooting modes (halogen light mode, fluorescent light
mode, daylight mode and user mode).
(When a setting in one mode is changed, the same setting
is established in the other modes.)
 Other Set menu for halogen light mode,
fluorescent light mode and daylight mode
 Other Set 
Focus
1--------
Iris
2--------
Format
3--------
Aspect
4--------
Status
5--------
Component
6--------
Focus ADJ With Zoom
7--------
Return
8------
1 Focus adjustment auto/manual selection
[Focus: Auto, Manual]
(Factory setting: Auto)
Auto:
The lens is always focused automatically.
Manual: The lens is focused manually.
2 Iris adjustment auto/manual selection
[Iris: Auto, Manual]
(Factory setting: Auto)
Auto: The iris is always adjusted automatically.
Manual: The iris is adjusted manually.
 If "Auto" is selected as the gain adjustment (Gain)
setting when the manual setting has been selected for
the iris, the iris will be automatically changed to the
automatic setting.
 If the manual setting is selected for the iris when "Auto"
has been selected as the gain adjustment (Gain)
setting, the gain adjustment will be automatically
changed to the last gain setting.
3 Video format selection
[Format: 1080i, 720p, 576i, 576psF]
(Factory setting: 1080i)
Even when this item's setting is changed, the video
format is not switched immediately. A screen on which to
confirm the setting change appears when an operation
involving a transfer to another item has been performed.
(Refer to the next page.)
4 Video aspect ratio selection
5 AWC/ABC operation status display ON/OFF
Auto
Auto
1080i
---
Off
---
On
6 Component signal selection
7 ON/OFF selection of focus compensation during
8 Return to the previous menu (menu for
49 (E)
[Aspect: ---, 16:9, 4:3]
(Factory setting: 16:9)
When "576i" or "576psF" has been selected as the "video
format (Format) setting", either "16:9 (squeeze)" or "4:3
(sides cut off)" is selected as the aspect ratio.
When "1080i" or "720p" has been selected as the "video
format (Format) setting", "---" appears, and the aspect
ratio cannot be selected.
At this time, the aspect ratio of the composite signals is
fixed at "16:9 (squeeze)".
selection [Status: Off, On]
(Factory setting: Off)
Using this item, the display of the operation status for
AWC (auto white balance adjustment) or ABC (auto black
balance adjustment) is set to ON or OFF.
When AWC or ABC is executed with this item set to "On",
the following is displayed.
AWC ACTIVE: This is displayed while AWC is being
executed.
AWC OK: This is displayed for 3 seconds after
AWC was completed successfully.
AWC NG:
This is displayed for 3 seconds after
AWC was not completed successfully.
ABC ACTIVE: This is displayed while ABC is being
executed.
ABC OK: This is displayed for 3 seconds after
ABC was completed successfully.
ABC NG:
This is displayed for 3 seconds after
ABC was not completed successfully.
[Component: ---, Y/Pb/Pr, Y/C]
(Factory setting: Y/Pb/Pr)
When "576i" or "576psF" has been selected as the "video
format (Format) setting", either "Y/Pb/Pr" or "Y/C" is
selected as the component signals.
When "1080i" or "720p" has been selected as the
"video format (Format) setting", "---" appears, and the
component signal setting cannot be selected.
zooming function
[Focus ADJ With Zoom: On, Off]
(Factory setting: On)
When the focus is set to manual, the subject may go out
of focus during zooming.
Select ON or OFF for the function which compensates for
this out-of-focusing.
If the function has been set to OFF, either adjust the
focus, as required, after zooming or set the focus to auto.
selecting the shooting mode) [Return]