Specifications - Panasonic AW-HE100E Manual De Usuario

Specifications

Power supply:
220 V to 240 V AC, 50 Hz
Power consumption:
Approx. 40 W
GENERAL
Operating temperature:
Storage temperature:
Allowable humidity ranges:
Weight:
Dimensions (W  D  H):
Finish:
Controller supported:
INPUT
Input connector:
OUTPUT
Output connector:
INPUT/OUTPUT
Input/Output connector:
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors:
Lens:
Focus:
Colour separation optical system: Prism system
Gain selection:
Electronic shutter speed:
Gamma:
0 °C to +40 °C
–20 °C to +50 °C
Less than 85 % (no condensation)
Approx. 7.5 kg
238  257  343.5 mm (excluding protrusions)
Light silver matte finish
AW-RP655, AW-RP555, AW-RP400, AW-IF400, AW-CB400
 It may be necessary to upgrade the version of the controller so that the controller will
support the unit.
220 V to 240 V AC (50 Hz),
G/L IN (BNC)
 BBS or VBS signal supported
Composite: 1.0 Vp-p/75  (BNC  1),
HD/SD analogue component or SD Y/C signals (VGA 15P  1)
 Y/C signals available in SD mode only; switching with Y/Pb/Pr signals possible
using menu setting
SD/HD selection possible when Y/Pb/Pr signals are output.
CONTROL IN RS422A (RJ-45)
1/3˝ CCD imaging sensors  3 (inter-line type, progressive system supported)
Motorized 13 zoom, f/1.6 to 2.8
(f=4.2 to 55 mm; 35 mm equivalent: 32.5 mm to 423 mm)
Switching between auto and manual
0 to 12 dB in step, 15 dB,
18 dB, AGC (iris always operated automatically at the AGC ON setting)
1/120, 1/250, 1/500, 1/1000, 1/2000 sec.,
Synchro scan (50.08 to 250.00 Hz)
Low, Normal, High
59 (E)
indicates safety information.