Publicidad
Idiomas disponibles
Idiomas disponibles
• Install the special clamp tool and lock it with the M8 locking
knobs.
Please note that the bell is not connected to the flywheel.
• Rotate the special tool's handle to compress the cup spring
totally; Now the bell is close to the flywheel.
• Place and tighten the clutch's locking screws to the flywheel.
• Release the pressure of the tool, and remove all parts.
• Mount now the remaining three screws and finish the operation.
7
Pressure plate
8
9
10
11
Plate
Flywheel
15
Publicidad
