geberit AquaClean Sela Instrucciones De Montaje página 28

EN
Setting user detection mode
Prerequisites
The device must be switched off.
Set hotel mode:
Result
The LED on the lateral control panel lights up blue
for 5 seconds.
Set standard mode:
Result
The LED on the lateral control panel flashes blue
five times.
28
Handing the Geberit AquaClean
Sela over to the customer
Prerequisites
The Geberit AquaClean Sela is ready for operation.
1
Instruct the customer with regard to
operation and cleaning.
For detailed information on the operation
and cleaning, see operating instructions.
2
Hand over end-user documentation to the
customer.
3
Fill in the warranty card together with the
customer, attach the serial number sticker
and send it to Geberit.
4
Attach a second serial number sticker,
e.g. to the last page of the operating
instructions, so it is available for later use.
B1070-005 © 08-2015
966.102.00.0 (04)